View 03P6MG-T_604222.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
THYRISTORS
03P4MG,03P6MG
300 mA HIGH-WITHSTANDING-VOLTAGE MOLD SCR
DESCRIPTION
The 03P4MG and 03P6MG are P-gate fully diffused mold SCRs with an average on-state current of 300 mA. The repeat peak off-state voltages (and reverse voltages) are 400 and 600 V.
PACKAGE DRAWING (Unit: mm)
5.2 MAX.
FEATURES
* 400 and 600 V high-withstanding-voltage series of products * The non-repetitive withstanding voltage is a high 700 V, making it easy to harmonize the rise voltage of the surge absorber. * High-sensitivity thyristor (IGT = 3 to 50 A) * Employs flame-retardant epoxy resin (UL94V-0)
1.5
Electrode connection 1: Gate 2: Anode 3: Cathode *TC test bench-mark Standard weight: 0.3 g
0.5 1.27
1.77 MAX.
APPLICATIONS
Leakage breakers, SSRs, various type of alarms, consumer electronic equipments and automobile electronic components
1 2 3
2.54
4.2 MAX.
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Parameter Symbol 03P4MG Non-repetitive Peak Reverse Voltage Non-repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Repetitive Peak Off-state Voltage Average On-state Current Effective On-state Current VRSM VDSM VRRM VDRM IT(AV) IT(RMS) ITSM 700 700 400 400 Ratings 03P6MG 700 700 600 600 V V V V mA mA A As A/s mW mW mA V C C
2
12.7 MIN.
5.5 MAX.
Unit
Remarks
RGK = 1 k RGK = 1 k RGK = 1 k RGK = 1 k Refer to Figure 10. - Refer to Figure 2. - - Refer to Figure 3. Refer to Figure 3. - - - -
300 (TA = 30C, Single half-wave, = 180) 470 8 (f = 50 Hz, Sine half-wave, 1 cycle) 0.15 (1 ms t 10 ms) 20 100 (f 50 Hz, Duty 10%) 10 100 (f 50 Hz, Duty 10%) 6 -40 to +125 -55 to +150
5
Surge On-state Current Fusing Current Critical Rate of On-state Current of Rise Peak Gate Power Dissipation Average Gate Power Dissipation Peak Gate Forward Current Peak Gate Reverse Voltage Junction Temperature Storage Temperature
iT dt
2
dIT/dt PGM PG(AV) IFGM VRGM Tj Tstg
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. D15290EJ4V0DS00 (4th edition) Date Published February 2003 NS CP(K) Printed in Japan
The mark 5 shows major revised points.
2002
03P4MG,03P6MG
ELECTRICAL CHARACTERISTICS (Tj = 25C, RGK = 1 k)
Parameter Symbol Conditions Specifications MIN. Non-repetitive Peak Reverse Current Non-repetitive Peak Off-state Current Critical Rate-of-rise of Off-state Voltage On-state Voltage Gate Trigger Current Gate Trigger Voltage Gate Non-trigger Voltage Holding Current Turn-off Time VT IGT VGT VGD IH tq IT = 4 A VDM = 6 V, RL = 100 VDM = 6 V, RL = 100 VDRM Tj = 125C, VDM = 2 VDM = 24 V, ITM = 4 A Tj = 125C, IT = 200 mA, dIR/dt = 15 A/s, VR 25 V, 2 VDM = 3 VDRM, dVD/dt = 10 V/s Thermal Resistance Rth(j-C) Rth(j-A) Junction-to-case DC Junction-to-ambient DC - - - - 50 230 C/W C/W Refer to Figure 14. Refer to Figure 14. - 3 - 0.2 - - - - - - - 60 2.2 50 0.8 - 5 - V Refer to Figure 1. - - - - - dVD/dt IDRM VDM = VDRM IRRM VRM = VRRM Tj = 25C Tj = 125C Tj = 25C Tj = 125C 2 Tj = 125C, VDM = VDRM 3 - - - - 10 TYP. - - - - - MAX. 10 100 10 100 - Unit Remarks
A A A A
V/s
- - - - -
A
V V mA
s
TYPICAL CHARACTERISTICS (TA = 25C)
Figure 1. iT vs. T Characteristics
10000 MAX.
Figure 2. ITSM Rating
14
At initial, Tj = 125C ITSM 10 ms 20 ms
Surge On-state Current ITSM (A)
2 3
On-state Current iT (mA)
12 10 8 6 4 2
1000 Tj = 125C 25C 100
10 0 1
0
1
5
10
50
100
On-state Voltage T (V)
Cycles (N)
2
Data Sheet D15290EJ4V0DS
03P4MG,03P6MG
Figure 3. Gate Rating
5.0
1.2
Figure 4. Example of Gate Characteristics
Gate Forward Voltage VFG (V)
Gate Trigger Voltage VGT (V)
4.0
1.0 0C 0.8 0.6 0.4 0.2 25C
Tj = -40C
3.0 PGM = 100 mW 2.0 PG(AV) = 10 mW 1.0 IFG = 100 mA 0
0
0
20
40 60 80 100 Gate Forward Current IFG (mA)
120
0
50
100 150 200 250 300 Gate Trigger Current IGT (A)
350
Figure 5. IGT vs. TA Example of Characteristics
100
Figure 6. VGT vs. TA Example of Characteristics
1.2
Gate Trigger Current IGT (A)
10
Gate Trigger Voltage VGT (V)
-40 -20 0 20 40 60 80 100 120 140 Ambient Temperature TA (C)
1.0
0.8
0.6
1
0.4
0.2
0.1
0
-40 -20 0 20 40 60 80 100 120 140 Ambient Temperature TA (C)
Figure 7. iGS vs. Example of Characteristics
10
Figure 8. GT vs. Example of Characteristics
1.0 TA = 25C
Supply Gate Trigger Current iGS (mA)
TA = 25C
Gate Trigger Voltage GT (V)
1000
5
iGS RGK 1 k
0.8
0.6
1 0.5
0.4
0.2
0.1
1
10 100 Pulse Width (s)
0
1
10 100 Pulse Width (s)
1000
Data Sheet D15290EJ4V0DS
3
03P4MG,03P6MG
Figure 9. PT(AV) vs. IT(AV) Characteristics Average On-state Power Dissipation PT(AV) (W)
0.7 0.6 0.5 0.4 0.3 60 0.2 0.1 0 30 90
Single Half-wave
Figure 10. TA vs. IT(AV) Characteristics
Single Half-wave
120
Ambient Temperature TA (C)
= 180 120
DC
100 80 60 40 20 0
30 0
60 90 120 = 180
DC 500
0
100 200 300 400 Average On-state Current IT(AV) (mA)
500
100 200 300 400 Average On-state Current IT(AV) (mA)
Figure 11. PT(AV) vs. IT(AV) Characteristics Average On-state Power Dissipation PT(AV) (W)
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 30 90 60 120
Single Full-wave
Figure 12. TA vs. IT(AV) Characteristics
Single Full-wave
120
Ambient Temperature TA (C)
= 180
100 80 60 40 20 30 0 60 90 120
= 180
500
0
100 200 300 400 Average On-state Current IT(AV) (mA)
500
0
100 200 300 400 Average On-state Current IT(AV) (mA)
Figure 13. IH vs. TA Example of Characteristics
10 5
Holding Current IH (mA)
1 0.5
0.1
-40 -20 0 20 40 60 80 100 120 140 Ambient Temperature TA (C)
4
Data Sheet D15290EJ4V0DS
03P4MG,03P6MG
Figure 14. Zth Characteristics
1000
Transient Thermal Impedance Zth (C/W)
Connection to ambient
100
10
1 0.001
0.01
0.1
1
10
100
1000
Time t (s)
Data Sheet D15290EJ4V0DS
5
03P4MG,03P6MG
* The information in this document is current as of February, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 03P6MG-T

	To Download 03P6MG-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .